Portfolio 16034 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
4. Insert anchor bolts (II) into the 1/8" holes drilled into
ceiling. Attach couplings (G) to the anchor bolts (II)
with mounting screws (HH). (See Fig. 4.)
Hardware Used
Mounting
HH
Screw
Anchor
II
Bolts
5. Ground wire connection guide (See Fig. 5.):
• For installation in the United States:
Wrap ground wire from outlet box around
ground screw (FF) on mounting bracket (EE),
no less than 2 in. from wire end. Tighten
ground screw (FF). If fixture is supplied with
a ground wire, connect to outlet ground wire
with an extra wire connector (AA).
• For installation in Canada:
If fixture is supplied with ground wire, wrap
ground wire around ground screw (FF) on
mounting bracket (EE). Tighten ground
screw (FF).
Hardware Used
AA
Wire Connector
Mounting
EE
Bracket
Ground
FF
Screw
x 2
x 2
x 1
x 1
GND
4
Ceiling
5
FF
AA
6
Drill
II
Hole
G
HH
EE
GND