Pulse New Gate Instrucciones página 9

ING
A notification will appear asking you to enter the configuration portal. If it doesn't appear, write one of the following adresses in your browser:
4
http//www.msftconnecttest.com/redirect or 192.168.4.1
You will see 4 options in the configuration portal, click the first one.
5
When you access the first option you will see the following:
6
First of all a list of available networks. You have to click on the network that you want to connect the Micrac Pulse.
You must fill all the fields with the following information.
- Password: The network's password.
- Config port: The free external port in your router (point C, before installing).
- Config user: Your Cloudfort user.
- Config password: Your Cloudfort user's password.
- Config name: The device name (for example: Front door).
- Static IP:
- Static Gateway:
- Subnet: The network's mask (Usually 255.255.255.0).
Once the information is completed, press the save button.
7
Wait a minute until the Micrac Pulse sends the information to the server. The configuration led will turn green.
8
Connect to the web http://cloudfort.life or use the Cloudfort application.
Observations:
- After configuration is completed, if the configuration led turns red and the micrac's network appears again, it means
that the server has rejected the configuration due to and incorrect user or password. Repeat the configuration process.
CLOUDFORT
- Configure Wifi: For configuring the WifF access.
- Configure Wifi (No Scan): For configuring the WiFi with a provided SSID.
- Info: Company's information.
- Reset: For resetting the Micrac Pulse.
A free internal IP in your network (point B, before installing).
Network's gateway (Usually 192.168.1.1).