Environmental Protection - BDS 6647 Guia Del Usuario

OPERATING
1. Press the "ON" button to turn on the instrument and the backlight.
The display lights up for 2 seconds and then shows a zero value.
2. To select desired unit, press "ON" button:
PSI - BAR - kPa - kg/cm2 – PSI
3. Remove tire valve cap (B).
4. Place the instrument's nozzle (5) onto the tire's valve (A).
5. Ensure that a good seal exists between the nozzle and the valve by
pressing tightly, no hissing sound of escaping air should be heard.
6. Wait until the reading keeps stable for about 2 seconds, this stable
reading is the result you want. Remove the nozzle, the measurement is
finished. You can now go on to measure other tires.
7. lf you don't operate the instrument for about 85 seconds, it will turn off
automatically. To turn off it ahead of time, press and hold down the
"ON" button until the current reading disappears, and then release the
"ON" button, the backlight and the instrument will turn off.
CLEANING
To clean, use a soft damp cloth.
Do not immerse the instrument in water.
Do not spray it with water or other liquids.
Do not use abrasive or solvent.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and disposed
of in a manner which is compatible with the environment.
DISPOSAL
Do not dispose battery in household waste.
Batteries should be disposed of in a responsible manner, they must be disposed at
appropriate collection point.
Dispose of this product at the end of its working life in compliance with the EU Directive
on Waste Electrical and Electronic Equipment. Contact your local solid waste authority
for recycling information or give the product for disposal to BGS technic KG or to an
electrical appliances retailer.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed