Replacing A Fuse - TECshow Mini Bubble Master Manual De Usuario

Replacing a Fuse

Power surges, short-circuit or inappropriate electrical power
supply may cause a fuse to burn out. If the fuse burns out, the
product will not function whatsoever. If this happens, follow
the directions below to do so.
1. Unplug the unit from electric power source.
2. Insert a flat-head screwdriver into a slot in the fuse cover.
Turn the screwdriver to the left, at the same time gently push
a bit (Turn and Push). The fuse will come out.
3. Remove the used fuse. If brown or unclear, it is burned out.
4. Insert the replacement fuse into the holder where the old
fuse was. Reinsert the fuse cover. Be sure to use a fuse of the
same type and specification. See the product specification
label for details.
MINI BUBBLE MASTER p. 3
ENGLISH VERSION