Dell CT3021 Guia Del Usuario página 7

To avoid risk of electric shock, do not expose electrical components to water, cleaning solutions or other
potentially corrosive liquids or substances.
•
Keep the cart away from water
•
Do not place the cart near flammable liquids or gases.
•
Do not immerse cart or cart components in liquid or allow liquids to flow into the cart
•
Liquids should not be stored in, set on or placed inside the cart.
•
Only clean the surfaces of cart with soft dry cloth. Do not use liquid, spray or abrasive cleansers.
•
Use only disinfecting wipes containing no bleach.
•
To prevent overheating, always power off devices before placing in the cart to charge.
•
Check casters periodically to ensure they are clean and free of debris.
•
Make sure equipment is balanced and installed securely to cart.
•
Cart is not designed to be operated by a child; adult operation is always recommended.
•
The cart is designed to be used indoors only.
Moving the Cart
•
Only Adults should move this cart.
•
Before moving the cart:
1. Turn the power to the cart off using the on/off switch.
2. Unplug the power cord from the wall.
3. Make sure the cable is wrapped and secure.
4. Ensure the doors are closed and locked.
5. Remove items from the top work surface.
6. Unlock the front rotational locking casters.
•
Push (do not pull) the cart for optimum maneuverability and to prevent muscle strain.
•
Do not move the cart across rough, uneven, or irregular surfaces such as gravel.
•
Do not move cart by pulling the power cord.
•
Use extra caution on ramps and over thresholds.
Parking the Cart
•
Do not park the cart in heavy traffic areas.
•
Do not run cables through doorways or through holes in ceilings or walls.
•
Do not run cables across hallways, classrooms, or other areas where they could be walked on.
•
Keep the front rotational locking casters locked whenever it is unattended.
•
Do not allow anyone to sit, stand, or climb on the cart.
•
Do not lift the cart from the bottom.
•
Do not block the vent openings. To prevent overheating, leave at least 127 mm (5 in.) clearance
around vents.