Parts & Assembly - Nostalgia Products SM32RR Instrucciones Y Recetas

PARTS & ASSEMBLY
Parts
Blending Chamber
Blending Chamber
Lid
After Taking the Unit Out of the Box
Wipe down the RETRO SLUSH MACHINE exterior with a clean, non-abrasive cloth
or sponge. Thoroughly wash Blending Chamber, Aluminum Cylinder, Cylinder Cage
and Lid in warm, sudsy water and thoroughly dry. DO NOT put the Base in water.
Assembly
1. After drying, firmly attach Blending Chamber to Base by placing the
Blending Chamber on top of Base. If Blending Chamber is attached properly,
it will be aligned with Base so that the Spout is over the Drip Tray.
2. Next, put Mixing Mechanism inside of Aluminum Cylinder and put Aluminum Cylinder
inside of Cylinder Cage. Then place Cylinder assembly inside of Blending Chamber.
1.
5
Base
Spout
Drip Tray
Aluminum Cylinder
Mixing Mechanism
2.
Cylinder Cage