Viega ManaBloc Instrucciones Del Producto

Product Instructions
Viega ManaBloc
®
Access Panel Installation
1 2
EN
Viega ManaBloc
Access Panel Installation
Viega products are designed to be
installed by licensed and trained plumbing
and mechanical professionals who are
familiar with Viega products and their installation.
Installation by non-professionals may void
Viega LLC's warranty.
WARNING!
The ManaBloc access panel is designed to
fit between 16" on center framing. If other
than 16" on center framing is present, additional
bracing will be needed.
Using your ManaBloc part number and chart
below, determine the proper cut-out size.
Part No. Max. Ports
50718 14
50726 16
50730 24
50739 36
3
Panel
Insertion
Slots
1
Cut and remove the section of dry wall over the
ManaBloc, centering the opening between the
studs. Ensure that all tubing connections and
valves are accessible.
2
Remove the panel from the frame by lifting the
bottom of the panel up and outward. Then remove
from the top frame slot with a downward motion.
3 Place frame, with the small slot at the bottom,
into the dry wall opening, resting the frame on
bottom of the opening.
4
Lift frame up ¼" and use provided hardware to
secure frame to studs, being careful not to over-
tighten.
5
Replace the panel by inserting top edge of panel
into the upper frame slot. Then, while pushing the
panel in, lower into bottom slot of frame.
Dimensions (in) Cut out (in)
14 18 14⅜ 19¾
x x
14 26 14⅜ 27¾
x x
14 30 14⅜ 31¾
x x
14 39 14⅜ 40¾
x x
EN
This document is subject to updates. For the most current Viega
technical literature please visit www.viega.us.
ES
Este documento está sujeto a actualizaciones. Para consultar la más
reciente literatura técnica de Viega visitar www.viega.mx.
FR
Viega LLC
585 Interlocken Blvd.
Ce document est soumis à des mises à jour. Pour consulter les
Broomfield, CO 80021
manuels techniques Viega les plus récents, consultez notre site
www.viega.ca.
Phone (800) 976-9819
www.viega.us
4 5
Outside (in)
16½ 21¼
x
16½ 29¼
x
16½ 33¼
x
16½ 42¼
x
Product Instructions
Viega ManaBloc Access Panel
Installation
Instrucciones del Producto
Instalación de panel de acceso
ManaBloc
Directives du Produit
Installation du panneau d'accès
ManaBloc
PI-PF 566418 1119 ManaBloc Access Panel Installation (EN ES FR)