Care And Maintenance; Troubleshooting; Corrective Action; Warranty - Kobalt KXRS 124B-03 Manual Del Usuario

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove battery from the tool. For safe and
proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your impact driver; never use detergent or alcohol.

TROUBLESHOOTING

WARNING
• Place the direction-of-rotation selector (C) in the center lock position, and remove battery
from the tool before performing troubleshooting procedures.
PROBLEM
Tool does not work.
Blade binds, jams,
or burns the wood.
The motor is
overheating.

WARRANTY

For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Low battery capacity.
1. Improper operation.
2. Dull blade.
3. Improper blade.
Cooling vents are
obstructed.

CORRECTIVE ACTION

Charge the battery pack.
1. See "OPERATING INSTRUCTIONS"
section.
2. Replace or sharpen blade.
3. Replace blade.
Clean and clear the vents. Do not cover
the vents with your hand during operation.
14
Printed in China