OP 1015
AIR REEL Ø8mm 16m
CONNECTIONS
Connect hose reel to compressed air system at a maximum pressure not exceeding 218 psi.
Mount a quick tting or the pneumatic tool on the pipe as it comes out, using the tting already pressed onto the
pipe. While in use, prevent the pipe from rubbing on sharp edges or on blunt objects. If the pipe is deteriorated,
have a specialist replace it.
The reel is equipped with a spring-loaded coiling system with automatic blocking device. Always guide the pipe
while it is being coiled and take care, while operating, not to accidentally release the catch. Install the coiler in
such a way as to prevent it from causing injury to personnel or damage to property.
If this reel is destined to be installed on a machine, it is expressly forbidden to start operating it before the machine
where the coiler is installed has been declared to be in compliance with the directive's norms.
PRECAUTIONS
Components have been chosen and used keeping mind the operatingconditions and life span of the machine.
Install the machine so that it presents no danger to exposed personnel, as long as it is used correctly.
No protection or warning will ever be suf cient if the person fails to take certain precautions, if the machine is not
maintained in peak operating condition, and if the following recommendations are not followed.
Learn correct use and adjustment before starting work. Check that personnel using the machine does so safely and
knows its operation.
Avoid exposing yourselves and others to unnecessary risks. Insist that personal protection systems be used, where
prescribed.
Do not remove, modify, or inhibit SAFETY DEVICES put in place by the manufacturer, but rather verify that they are
not removed or rendered less effective.
Work in an environment that is orderly and free of hazards, with adequate light and room to work in.
Keep the working area free of tools and any other unnecessary object.
In the event of having to do work on the mechanical parts or replace the tube, contact an after-sales centre. Work
done by unauthorised persons is very risky due mainly to the preloaded spring and will invalidate every type of
warranty.
NOT SUITABLE FOR INFLAMMABLE GAS TRANSMISSION.