7
LIGHTS-LIGHTS-LIGHTS!
When the switch is in the "ON" position
(all the way to the right), the lights will run
continuously.
To Select a Mode:
1. The switch must be in the "ON" position.
2. Press the "Modes" button the number of
times indicated to the left of the selection
you want to activate.
8
Store it!
If you decide to store your slide, be sure to remove the steps.
Pull up on the steps
and remove them from
the slide.
Place the steps along the back of the slide.
Be sure the tab is clicked into the slot.
12
Modes
1. Combination
2. In Wave
3. Sequential
4. Slow Glow
5. Chasing/Flashing
6. Fade
7. Flash/Twinkle
8. Steady on
9. O
Modes
ON
OFF