Limitation Of Liability; Declaration Of Conformity; Troubleshooting - Beem Air Joy Cool Manual De Instrucciones

BEEM - Elements of Lifestyle
Please visit our website to obtain more
information on comprehensive guarantee
conditions, available accessories and spare
parts as well as user manuals in various lan-
guages.
Please contact your supplier if you have any
questions on guarantee conditions, ordering
accessories or service handling outside of
Germany.

Limitation of liability

We assume no liability for damage or follow-
up damage in the case of:
failure to observe the operating instruc-
tions, improper use, improper or unsuitable
handling, incorrectly performed repairs, un-
authorized modifications, use of third-party
parts or replacement parts, use of unsuitable
supplementary or accessory parts.

Declaration of Conformity

BEEM hereby declares that this appliance
complies with the fundamental requirements
and other relevant provisions of 2004/108/
EC, 2006/95/EC, 2009/125/EC und 2011/65/
EU directives.
The following table helps in localising and remedying minor faults. If you cannot resolve the
problem with the steps described, please contact customer service.
Fault
The indicator lamp does
not light up after switch-
ing on.
The fuse in the electrical
distribution blows.
The airflow is too weak.
The appliance switches
itself off.

Troubleshooting

Possible cause
Plug not inserted into socket.
Fuse in electrical distribution
board switched off.
Too many appliances connect-
ed to the same power circuit.
No fault detected.
There is contamination in the
air inlets or between the air
slots.
The appliance is tipped and
the safety switched has
switched it off.
Remedy
Insert plug.
Switch on fuse.
Reduce the number of appli-
ances on the power circuit.
Contact customer service.
Eliminate possible contami-
nation as described in the
section Cleaning and main-
tenance (page 12).
Place the pedestal of the
appliance on a firm and flat
surface. so that it cannot tip.
EN 13