UPM TSH723 Manual De Uso

INDOOR CLOCK WITH
TEMPERATURE & HUMIDITY DISPLAY
TSH723
OWNER'S
MANUAL
TEMPERATURE
HUMIDITY
TIME OR DATE
1
SET ALARM
(Press:)
1. MODE (press until the alarm clock "bell" appears)
2. SET
3. UP or DOWN (to select alarm hour)
4. SET
5. UP or DOWN (to select alarm minute)
6. SET
7. UP (ON will display to indicate alarm on / press again to
turn alarm off)
SET ºC or ºF
1. DOWN (press in normal clock mode / ºC or ºF will display)
SEE MIN. / MAX. DAILY TEMPERATURE
1. UP (press in normal clock mode / Min./Max. temperature
will display)
4
SET CLOCK
1. MODE (press until clock display appears)
2. SET
SET (on back of unit)
3. UP or DOWN (to select hour)
4. SET
5. UP or DOWN (to select minute)
6. SET (to restore normal clock mode)
UP
SET 12 or 24 HOUR CLOCK
MODE
1. MODE (press until alarm clock "bell" appears)
2. DOWN (press to toggle between 12 and 24 hours)
DOWN
3. Select a time after 12 noon,
- PM = 12 hour mode,
- a number from 13 to 23 = 24 hour mode
4. MODE (to restore normal clock mode - setting will remain)
SPECIFICATIONS
Features:
• Easy-to-read LCD display
• Alarm clock and calendar
• Indoor temperature and humidity display
• Mounts on desk, wall or with magnet
2 x AAA batteries required
Temperature range: -20ºC to +50ºC / -4ºF to +122ºF
Humidity range: 15% to 95%
For indoor use only
Low battery symbol
For customer service go to: www.upm-marketing.com
Or call: 1-888-GO-TO-UPM (1-888-468-6876)
(Press buttons in the following order:)
(Press:)
2
5
SET DATE
(Press:)
1. MODE (press until month / day / weekday appears)
2. SET
3. UP or DOWN (to select month)
4. SET
5. UP or DOWN (to select date)
6. SET
7. UP or DOWN (to select weekday)
8. SET / MODE (to restore normal clock mode)
3
LIMITED ONE-YEAR WARRANTY
UPM warrants this product, excluding batteries, to be free from defects
in the materials or workmanship, under normal use and service, for a
period of one (1) year from the date of purchase by the consumer.
If, at any time during the warranty period, the product is defective or
malfunctions, UPM shall replace it (at UPM's discretion) within a
reasonable period of time.
If the product is defective, return it, with a dated proof of purchase, to
the retailer from which you purchased it.
This warranty shall not apply if it is shown by UPM that the defect or
malfunction was caused by damage which occurred while the product
was in the possession of the consumer.
6