Vehicle VIN must be updated with the sales code of the added accessory in order to enable
system functionality. Using the DealerCONNECT website and a StarSCAN diagnostic tool,
complete the procedure below:
•
Log on to https://dealerconnect.chrysler.com
•
In the "Vehicle Option" screen under the "Global Claims System" category in the "Service" tab,
enter vehicle VIN and add sales code(s) noted below as a "Dealer Installed Option".
•
LNJ (Fog Lamps)
•
Confirm that the new sales code has been successfully added to the VIN.
With the StarSCAN diagnostic tool connected to both the internet (via Ethernet port or
wireless connection) and the vehicle, follow the steps below:
IN THE INITIAL START UP SCREEN
• PRESS - - - - - - - - - - VEHICLE PREPARATION
• TOGGLE DOWN AND HIGHLIGHT - - - - RESTORE VEHICLE CONFIGURATION
• PRESS - - - - - - - START
• PRESS - - - - - - - NEXT>
• IF NECESSARY, SELECT PROPER VEHICLE LINE AND MODEL YEAR AND PRESS - - - - NEXT>
• CONFIRM CORRECT SELECTION AND PRESS - - - - NEXT>
• ENTER VEHICLE VIN USING ON-SCREEN KEYBOARD OR CONFIRM THAT
AUTO-FILLED VIN MATCHES VEHICLE VIN PLATE AND PRESS - - - - NEXT>
• PRESS - - - - - - - OK
• ENTER USER ID, PASSWORD AND DEALER CODE USING ON-SCREEN
KEYBOARD AND PRESS - - - - - - - OK
• WAIT FOR VEHICLE CONFIGURATION DATA TO BE DOWNLOADED
AND THEN PRESS - - - - NEXT>
• PRESS - - - - - - - NEXT>
• CONFIRM THAT VEHICLE CONFIGURATION HAS BEEN PROGRAMMED SUCCESSFULLY
• NOTE ON-SCREEN INSTRUCTIONS AND PRESS - - - - - - - FINISH
Front fog lamps will be functional when park lamps or low beam lamps are activated. Front fog
lamps will shut off when high beam lamps are activated. (USA/CAN/ MEX regulation).
26
05-29-07
9 of 12
K6860543