Bucket Filter; Storage - GE APEL50 Manual Del Propietário

Care and Cleaning

Bucket Filter

The bucket filter is located inside the bucket near the
bottom. The filter should be checked when cleaning the
bucket. If the filter has any debris on it, gently remove
the filter as described below and rinse with warm water.
Replace the filter in the bucket once it is clean.
IMPORTANT: Be careful not to tear or damage filter
during removal, cleaning or replacement. Do not use the
dishwasher to clean the filter.

Storage

If the unit is to be stored for an extended period of time,
take the following actions before putting away the machine.
1. Empty the bucket of all water.
2. Clean the water bucket and bucket filter per instructions.
3. Allow water bucket to dry and reinstall.
4. Remove pump hose and store with unit.
49-5000427 Rev. 0
TO REMOVE THE FILTER:
1. Squeeze both clasp inward to disengage clasp clips from
water tank cover. Lift the cover upwards to remove.
2. Lift the end of the filter upwards to remove the filter.
TO REPLACE THE FILTER:
3. Place large end of filter above tabs, press filter down
firmly to spread tabs. Once filter is between tabs press
filter inward to engage tabs into filter.
4. Replace water tank cover and handle.
To Release Hose: Hold the grey ring while pulling the
hose to remove.
1. Hold grey ring in
2. Pull hose out
Cover
Rotate and lift filter up
9