Product Guarantee; Technical Specifications - BGS technic 8858 Manual De Instrucciones

VII PRODUCT GUARANTEE
•
If there is any quality problem since the purchase date within 2 years, manufacturers will provide
free repair services.
•
Man-made damage as a result of improper use, natural disasters or not in accordance with the
instructions and the damage caused is not within the warranty time, repair costs will be charged.
•
Keep well the guarantee card. It's not allowed to transfer. And only valid if it's issued by
authorized distributors or agents.
VIII TECHNICAL SPECIFICATIONS
Viewing Area 92 x 42 mm
Cartridge size 110 x 90 x 9 mm
Light state DIN 4
Dark state Variable Shade 9 - 13
Switch time 1/25000 sec.
Dark to Light 0.2 – 0.8 sec.
Shade control Extern, Variable
Sensitivity control Adjustable
Power On / Off Fully automatic
Power supply Solar cell, battery change required CR2032
UV/IR Protection DIN 16
Welding Processes
IX HELMET STRUCTURAL GRAPH
1 Helmet Body
2 Headgear
3 Headgear Adjusting Knob
4 Headgear Angle Adjusting Knobs
5 Shade No. Adjusting
6 Protective Plate
7 Solar Panel
8 Fixed Plate
9
Press card
10 UV IR Filter
X WELDING STRUCTURAL FIGURES
1. Self-test button
2. Low voltage indicator
3. Delay time control
4. Sensitivity control
5. Lithium batteries
6. LCD
7. Arc sensor
8. Solar cell
9. UV / IR filter
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
MMA, MIG, MAG/C02, TIG and Plasma Welding. Arc Gouging & Plasma
Cutting
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Arc Sensor 2
Low Amperage TIG ≥ 5 amp
Grinding Function Yes
Low Volume Alarm Yes
ADF self-check Yes
Operating
-5°C - + 55°C
Temperature
Storing Temperature -20°C - +70°C
Weight 480 g
Box Sizes (mm) 330 x 230 x 230
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed