AmazonBasics B07XMRCXJ7 Manual Del Usuario página 9

Button Function
• Press to activate the automatic mode. The button
indicator lights up.
• The product automatically operates dependently
on the temperature and humidity to provide the
optimum comfort for the user.
• Press again to deactivate the automatic mode.
Auto (F)
The button indicator goes off.
NOTICE
cannot be set manually.
• After approx. 250 hours of operation, the indicator
over the filter button lights up to remind the user to
clean the filter.
• After cleaning the filter, press and hold the filter
button for 3 seconds to switch the filter indicator off
Filter (G)
and to zero the filter counter.
• Press to toggle between continuous operation and
operation on demand.
• Button indicator on - Continuous operation:
The product operates continuously and absorbs as
much humidity as possible.
• Button indicator off - Operation on demand: Set
manually the desired room humidity with the < >
buttons (K). The setting is shown on the display (D).
The adjustable value is 35 % RH to 85 % RH.
Continuous
– After no button was pressed for 5 seconds, the
operation
setting is saved and the display (D) switches to the
(H)
actual room humidity.
– The product switches off, when the desired room
humidity is undercut by 1 %.
– The product switches on, when the desired room
humidity is exceeded by 5 %.
• Press to increase the fan speed for a faster room air
circulation. The button indicator lights up.
• Press again to set the fan speed to normal speed.
The button indicator goes off.
Turbo (I)
In this mode a preset humidity value
EN
9