Publicidad
Idiomas disponibles
Idiomas disponibles
Activation
You can switch on the stethoscope on its left
side. Turn the volume control knob forwards
(there is a slight resistance) until the red LED
lights up.
Now you can dial in the desired testing
volume by turning the control knob.
The one-way amplifier can be operated with
or without a tracer pin.
With tracer pin (attached via rubber adaptor)
Touch any aggregate (ex. alternator) and
other noises won't have any influence on your
testing procedure. You can easily detect a
defective bearing.
Without tracer pin
Noise is transferred without touching an
aggregate. Unintended negative influences
caused by streams of air through the car's fan
are amplified and will be made audible by the
headphones.
Testing with six-way amplifier
The six-way amplifier can be used for testing:
-
hard to reach spots
-
up to six spots simultaneously
-
when testing while driving
Perfect for checking rattling noise from the axles.
Battery
Push down the cover of the battery
compartment gently and shove it backwards.
Replace battery.
CAUTION
Check for the correct polarity.
Connection
The connection of the probe heads has to be
carried out in accordance to the colored and
numeric scheme provided. Only then you will
be able to detect and locate the noise
precisely.
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
On
Vol. +
Vol. -
Off
Yellow
Green White
Blue
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Red
Black
Publicidad
