Electromagnetic Fields (Emf); Preparing For Use - Philips MiniVac FC6132/01 Manual De Instrucciones

English
8

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.

preparing for use

The appliance comes with a shoulder strap and flexible hose (FC6130) or
with a stick and floor nozzle (FC6132) for extra convenience during
vacuum cleaning.
The appliance also comes with a brush tool to clean delicate surfaces and
a crevice tool to clean the hard-to-reach places.
attaching the shoulder strap (FC6130 only)
1 To attach the shoulder strap, connect the clasps to the attachment
points on the appliance.
Attaching the stick and the floor nozzle (FC6132 only)
1 To assemble the stick, connect the lower stick part to the upper
stick part ('click') (Fig. ).
Note: You cannot disassemble the stick once you have assembled it.
 Insert the stick into the attachment point for the stick at the back
of the appliance ('click') (Fig. ).
- Make sure the ridge on the stick aligns with the attachment point on
the appliance when the stick is inserted.
- Make sure the on/off slide on the stick is in 'off ' position.
 To detach the stick from the appliance, press the stick release
button with one hand (1) and pull the stick out of the appliance
with the other hand () (Fig. ).
 Attach the floor nozzle to the nosepiece (Fig. 5).
You can use the floor nozzle to clean hard floors and carpets.
The floor nozzle is equipped with a fluff collector that removes hair and
fluff.