Steren K-400 Manual De Instrucciones página 7

OPERATION OF THE PARALLEL PORT INTERFACE K-400
1. Never connect the parallel port interface K-400 to the computer if
the parallel port interface K-400 is connected to the power source.
2. Make sure the parallel port interface K-400 is powered off.
3. Once the parallel port interface K-400 is connected, make sure its
supported by a non-conducive surface and that this surface is free of
any elements that may cause a short circuit in the PCB circuit.
4. Make sure that the power cables are well connected and that the
power source is correct at 5 regulated volts.
Polarization Voltage:
Power Consumption:
Products design and specifications are subject to change without
previous notice.
SPECIFICATIONS
5 V - - -
60mA
ENGLISH-07