Kalorik TKG AP 1000 Manual De Usuario página 8

Installation of the filters
Remove the filter lid.
Remove the protective film from the HEPA filter and place it correctly in the unit.
Take out the filter Install HEPA + carbon filter
Filter replacement information
After about 1440 hours, when the filter needs to be replaced, the filter replacement
indicator will be flashing. After attaching the new filter, please press the power icon for 3
to 5 seconds.
Power supply
DC 5V
Power cord inlet Power cord
The device is powered by 5V DC - as it is in every standard USB socket.
The device comes with a cable to connect the power supply to the USB port.
Connect the cable from one side to the power supply socket, on the other to the USB
port on another device (eg Computer, USB socket in the car), or directly to the AC / USB
5V adapter (adapter is not included).
INSTRUCTIONS
TKG AP 1000 8