Checking The Battery Charge Level; Using The Adapter Sleeve; Initial Use; Switching On And Off - Parkside PAR 10.8 A1 Traducción Del Manual De Instrucciones Original

Checking the battery charge level

If the appliance is switched on, the status or residual
power is displayed as follows in the battery status
indicator :
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery

Using the adapter sleeve

The cordless ratchet is fitted with a 3/8" drive
shaft .
♦ If you wish to use spanner sockets with
a 1/4" socket, push the adapter sleeve
the drive shaft before use.
♦ If you wish to use bit inserts, push the adapter
sleeve onto the drive shaft

Initial use

Switching on and off
Switching on:
♦ To start the appliance, press the ON/OFF
switch and keep it pressed in.
Switching off:
♦ Release the appliance's ON/OFF switch
switch off the appliance.

Changing the direction of rotation

♦ You can change the ratchet rotation direction
by turning the rotation direction switch
left or right.
PAR 10.8 A1

Maintenance and cleaning

The cordless ratchet is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the appliance.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
onto
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
before use.
between 50% and 80%. The optimum storage
climate is cool and dry.
NOTE
► You can order spare parts using our service
hotline.
to
to the
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
GB
MT
37