Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

1. POWER ON/OFF

Insert the front panel in the unit and push Power button in order to switch on the unit. Push
newly in order to switch off the unit and push REL button (15) to release the front panel.
Note: Never release the front panel when the unit is on. Power remains on even when car radio is off.
2. SELECT
3. VOLUME UP/DOWN
Turing the VOL knob to right or left (3) to control the VOLUME. To select other functions, press the SEL (2)
button shortly until the desired functions is shown on the display. Figure 1 shows how control functions are
selected using the SEL button.
1
1. VOLUME
2. SELECT
These buttons can be used to adjust the BASS, TREBLE, BALANCE and FADER.
AUDIO DSP CONTROLS (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
2 sec.
+
SEL
DSP
VOL
DSP can be selected by turing the VOL knob to right or left (3)
POP M---ROCK M---CLASS---FLAT M---DSP OFF
BEEP MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
2 sec.
SEL
DSP
SEL
BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.
SEEK MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
2 sec.
DSP
SEL
SEL
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is
detected even user still push SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user push SEEK button.
When release this SEEK button, then stop when station is defected.
VOL LAST/ADJUST (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
2 sec.
SEL
DSP
SEL
VOL LAST: The volume level which user adjust lately is selected whenever power is ON and OFF.
VOL ADJ: The initial volume level (user can adjust) is selected whenever power is ON and OFF
All manuals and user guides at all-guides.com
2
3
2
4
Fig. 1 Selection of sound control functions
3. BASS
POP M --- ROCK M --- CLAS S --- FLAT M --- DSP OFF
+
BEEP
ON/OFF
VOL
BEEP
SEEK
SEL
BEEP
SEL
SEEK
2
5
2
6
4. TREBLE
5. BALANCE
+
SEEK1 / SEEK 2
VOL
+
SEL
VOL LAST
VOL
2
6. FADER
VOL LAST /
VOL ADJ
button
PAGE 4

Publicidad

Tabla de contenido
loading

Tabla de contenido