Publicidad
Idiomas disponibles
Idiomas disponibles
INTENDED USE
This suction and pressure syringe is used for suction / transfer of different types of oil, such as e.g.
engine, transmission, rear axle and hydraulic oil.
SAFETY ADVICE
•
Be sure not to spill anything when decanting. This applies for liquids that might be harmful to the
environment.
•
This pump is not specified for any application in the fields of food and cooking. Therefore do not
use this pump for drinking water.
•
Attention: Fire / Explosion Hazard ! This pump is not suitable for gasoline and other easy
flammable liquids. Static charge of the plastic hose may cause a spark and cause easy
flammable liquids to catch fire!
SPECIFICATIONS
Pump material:
Finish:
Capacity:
Pump length:
OPERATION
1. Connect the hose (1) to the hose connector (2) on the front part of the transfilling pump.
2. Open the container from which liquid is to be removed and insert the transparent hose (1) into the
container until it reaches the bottom of the container.
3. Hold the pump, pull plunger handle (6) back as far as it will go. Vision-check through the hose to
make sure if liquid appears.
4. Insert the transparent hose (1) into the container to be filled.
5. Push plunger handle (6) forward to the end of front cap (5).
6. Repeat above operation several times to get appropriate volumes of fuel.
1 Hose, transparent
2 Hose plug
3 Front cap
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Transfilling Pump
Steel
Chrome plated
500 ml
330 mm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Pump diameter:
Hose material:
Hose length:
Hose inner diameter:
4 Cylinder
5 End cap
6 Plunger handle
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 9823
56,4 mm
PVC
280 mm
10 mm
Publicidad
