Fellowes Tallo Flexcharge Instrucciones De Uso página 2

SAFETY INSTRUCTIONS/WARNING
• Tallo™ Flexcharge Hub is for charging Qi™ compatible smartphone only.
• Only use the power supply that was supplied with this product.
• It is normal for the wireless charging surface to get warm during charging. If there is an issue while charging, the
indicator lights will flash.
• Keep flammable materials away from charging surface.
• Only use the wireless charger for its intended purpose. Improper use, or use of incompatible devices may result in a
risk of fire, explosion, or other hazard.
• DO NOT attempt to charge a device that is damaged or an open battery case or a device that is not Qi™ compatible.
• DO NOT attempt to disassemble or repair the wireless charger.
• DO NOT use if power cord or transformer is damaged.
• Keep the wireless charging surface clean and dry.
• Use a soft, clean, dry cloth to clean the surface of the wireless charger.
• For indoor use only.
• Only compatible with Fellowes Tallo™ and Tallo Modular™ Monitor arms
CAPABILITIES
Port Description Specifications
1 Barrel Connector Power (12V, 3A)
2 USB Port (Type A) Fast Charging 5V,9V,12V, Max 2.4A
3 USB Port (Type C) Fast Charging 5V,9V,12V, Max 2.4A
4 Wireless Charging Pad 5V~9V, Max 10W
The frequency range is 110KHZ ~ 205KHZ.
The Maximum H-Field is -6dBuA/m
PARTS PROVIDED
A Charging Pad B Front Cover
2
Tallo_Flexcharge_Hub_411966_RevB_062520.indd 2-3
ENGLISH
1
4
2
3
C Rear Cover D Power Supply
INSTALLATION
STEP 1
Place charging pad over base of arm
* Note: user will not need to disassemble monitor arms
STEP 3
Place rear cover over back of housing (snap feature)
STEP 5
Place your Qi-enabled device onto the charging pad or use the USB ports to charge your device
Review your devices manual to see if it's Qi-enabled
White LED
Standby OFF
Charging On
Foreign Object
Flash
Detected
STEP 2
Attach front cover (snap feature)
• Pole Mount
• Single Arm
• Dual Arm
STEP 4
Plug in for power
6/25/20 3:50 PM
3