Storage - Craftsman 919.167783 Manual De Instrucciones

All manuals and user guides at all-guides.com
Before you store the air compressor,
make sure you do the following:
1. Review the "Maintenance" section
on the preceding pages and per-
form scheduled maintenance as
necessary.
2. Set the On/Auto/Off lever to "Off"
and unplug unit.
3.
the regulator knob out and turn
counterclockwise to set the out-
let pressure to zero when
removing hose or accessories to
prevent hose backlash.
4. Remove the air tool or accessory.
5. Pull ring on safety valve allowing
air to bleed from the tank until tank
pressure is approximately 20 psi.
A20361

STORAGE

6.
in the air tank. If not drained, water
will corrode and weaken the air tank
causing a risk of air tank rupture.
Risk of Flying
7.
Objects. Pull
NOTE: If drain valve is plugged, release
all air pressure. The valve can then be
removed, cleaned, and reinstalled.
8.
9.
18- ENG
Release safety valve ring.
Drain water from air tank by open-
ing drain valve on bottom of tank.
Risk of Bursting.
Water will condense
After the water has been drained,
close the drain or drain valve.
Protect the electrical cord and air
hose from damage (such as being
stepped on or run over). Wind
them loosely around the compres-
sor handle.
Store the air compressor in a clean
and dry location.