Publicidad
Idiomas disponibles
Idiomas disponibles
S
a
f
e
t
y
S
a
f
e
t
y
¡WARNING!
1. Read Instructions - Read all safety and operating instructions before operating the ap-
pliance.
2. Save Instructions - The safety and operating instructions should be retained for future
reference.
3. Keep in mind the precautions - every precaution of the apparatus in these instructions
should be taken into account.
4. Follow instructions - Follow all operating instructions and use.
5. Water and Moisture - The appliance should not be used near water.
6. Ventilation - The appliance should be situated so that the location or position adequate
ventilation is not prejudicial.
7. Heat - The appliance should not be located near sources of heat such as radiators, sto-
ves.
8. Power Supply - This device must be connected only as indicated by the manufacturer's
instructions
9. Touchdown and Polarization - Note proper precautions. 10. Food - The power cord that
came with your device may not be manipulated for a perfect and safe operation. 11. Clea-
ning - The appliance should be cleaned only in the manner indicated by the manufacturer.
12. Pin Feed - Follow the manufacturer's recommendations.
13. Power Lines - External antennas should be located away from the lines of tension.
14. Touchdown External Antenna - By connecting the antenna to the receiver, make sure
antenna system is connected to ground to protect against voltage variations and loads.
15. In use - Unplug the power cord if you are going to be a period of long time without
using the device.
16. Intrusion of objects and liquids - Be careful to avoid introducing objects or liquid inside
the housing. The device should not be exposed to dripping or splashes, and should not be
above the liquid-filled objects such as vases.
17. Requirement of Qualified Service - The appliance should be reviewed by technical staff
qualified:
- The power cord has been introduced within the device.
- Has been introduced an object or fluid within the apparatus.
- The device has been exposed to rain.
- The unit does not operate normally or exhibits a change in performance.
This symbol is intended to warn the user that there is a danger of electric shock
due to very high voltages.
This symbol is intended to alert the user to the presence of major maintenance
instructions in this manual that must be respected.
I
n
s
t
r
u
c
t
I
n
s
t
r
u
c
t
User Manual PTF800SD
User Manual PTF800SD
i
o
n
s
i
o
n
s
Publicidad
