Care And Maintenance - Allen + Roth BV-8369 Manual De Instrucciones

INSTALLATION INSTRUCTIONS
Optional Step 4 : Replace hardwares
4. Open the doors, remove the preassembled screws,
change the optional Golden knobs and relock the
screws.

CARE AND MAINTENANCE

• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• Clean the top with a glass cleaner or other household cleansers that are non-abrasive. Using
cleansers will damage the surface.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess
colorant promptly with a soft cloth.
WARRANTY
The manufacturer provides a one-year limited warranty for residential use. The vanity combo will
be free from manufacturing defects, provided the original purchaser resides in or owns the home of
installation, and provided the vanity combo is installed and maintained according to the installation and
maintenance instructions contained within and supplied by the manufacturer. The liability will be
limited to cost of products only. This warranty is in lieu of any other implied or expressed warranties.
This warranty applies only to the original purchaser. This warranty does not apply to any damage on
the product by accident, misuse, or modified, improper installation or by affixing accessories not
produced by the manufacturer. The manufacturer shall not be legally responsible for incidental,
consequential or special damages arising at or in connection with product use or performance except
as may otherwise be accorded by law.
5
4
abrasive