4.6 Drying and storage
• Place all parts on a dry, clean and absorbent surface and let
them dry completely.
• Wrap the nebuliser in a clean, lint-free cloth (e.g., a tea-
towel) and keep it in a dry, dust-free environment.
5
MISCELLANEOUS
5.1 Disposal
All product components can be disposed of with domestic
waste unless this is prohibited by the disposal regulations pre-
vailing in the respective member countries.
5.2 Technical data
Operating gases
Minimum flow
Corresponding minimum operating pressure
Maximum flow
Corresponding maximum operating pressure 2.0 bar / 200 kPa
Minimum fill volume
Maximum fill volume
Aerosol data according to DIN EN 13544-1 is available on re-
quest from PARI GmbH.
5.3 Explanation of symbols
The following symbols can be found on the nebuliser and/or
the packaging:
Manufacturer
– 49 –
Air, oxygen
3.0 l/min.
0.5 bar / 50 kPa
6.0 l/min.
2 ml
8 ml
en