Descargar Imprimir esta página

Important Safeguards - Russell Hobbs 18965-56 Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been supervised/instructed and understand the
hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don't leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its
service agent, or someone similarly qualified, to avoid hazard.
H Don't immerse the appliance in liquid.
Don't use accessories or attachments other than those we supply.
Don't use the appliance for any purpose other than those described in these instructions.
Don't use the appliance if it's damaged or malfunctions.
DIAGRAMS
1.
Speed control
2.
Flange
3.
Whisks
FITTING THE WHISKS/ HOOKS
1.
Switch off (0) and unplug the mixer before fitting or removing the whisks/hooks.
2.
Turn each whisk or hook to align the pips on the shaft with the slots in the drive head, then
push it into the drive head till it clicks into place.
3.
Fit the whisk/hook with the flange to the drive head with the large hole (fig. A).
4.
Use both whisks or both hooks, don't mix them.
REMOVING THE WHISKS/HOOKS
1.
Switch off (0) and unplug the mixer, then shake any excess mixture into the mixing bowl.
Hold both whisks/hooks, to prevent them jumping out, and press 5. This will eject them
2.
from the drive heads.
USING THE MIXER
Move the speed control to 0.
1.
2.
Put the plug into the power socket.
Move the speed control to the speed you require (1 to 5).
3.
Pressing the turbo button Y will over-ride the speed set by the speed control, and give you
4.
a burst of high speed. It only works when the motor is already running (1 to 5).
5.
Move the speed control to 0 to switch off.
Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.
HOUSEHOLD USE ONLY
4.
Balloon whisk
5.
Hooks
3

Publicidad

loading