Operation .PRocedure - Campbell Hausfeld CW301300AJ Instrucciones De Funcionamiento Y Manual De Piezas

Operating Procedure
In .the ."AUTO" .position, .the .compressor .
pumps .air .into .tank . .It .shuts .off .
automatically .when .unit .reaches .its .
maximum .preset .pressure . .In .the ."OFF" .
position, .the .pressure .switch .cannot .
function .and .the .compressor .will .not .
operate .
IMPOrTANT: .Read .
instructions .before .operating .
compressor .or .damage .may .
result . .
1 . . . Turn .switch .to ."OFF" .position .and .
plug .in .power .cord .(See .Figure .6) .
2 . . . Turn .switch .to ."AUTO" .position .to .
run .unit .(See .Figure .6) .
Notes
3 . . . Turn .regulator .knob .fully .
counterclockwise . .Compressor .will .
build .to .maximum .preset .pressure .
and .shut .off .
4 . . . Attach .end .of .hose .to .regulator .
knob . .Turn .regulator .clockwise .to .
increase .pressure .going .to .the .tool .
that .is .being .used .
position when connecting or
MANUAL
disconnecting the power cord from the
electrical outlet.
This switch should
be in the "OFF"
figure 6
3
Cw301300AJ, Cw301400AJ
www.chpower.com