Glacier bay 67070-0801 Guía De Uso Y Cuidado página 6

Installation (continued)
5
Securing the faucet assembly
□
Install the plastic washer (B), and metal washer
(C) onto the threaded mounting shank.
□
Thread the nut (D) onto the mounting shank.
Lock the nut (D) into position by tightening the
screws (P). Do not overtighten.
B
C
D
P
6
Attaching the quick connector
to the receiving block
□
Remove the cap (Q) from the quick connect
tube (1).
□
Push the quick connector (J) rmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
□
After connecting the hose, install the weights (K)
at the point of the hose marking "weights here".
1
Q
6
K
1
J