Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
G
S
UK
EAT-UP ChaiR boosteR seat
IORDANI
HOW TO OPEN THE CHAIR
MOUNTED SEAT
WARNING:
When opening the chair, ensure
that your child or other child is at a safe dis-
tance. Ensure that during these operations,
the movable parts of the chair do not come
into contact with your child.
1.
Take out the chair booster seat.
2.
Release the lock.
3.
Put the chair plate beside the chair
booster seat.
4.
Put the foot rest like the picture.
5.
The chair booster seat is unfold.
6.
Push the the circle in the plastic.
7.
Push the plastic like the picture.
WARNING!
The chair mouted seat set
to the lowest position may used only to
transport the
same and not to sit the child. Do not ad-
just the height of the booster seat with
the child sitting. Make adjustments
only with the booster without the child.
8.
Then the chair booster seat is in the one
position.
HOW TO FIT THE CHAIR BOOSTER SEAT
ON ADULT CHAIR
9.
This booster seat is designed to fit
on adult chairs with a minimum seat
dimension of 325mm width by 320
mm depth, with a minimum backrest
height of 440mm.
10.
Place the chair booster seat on the
adult chair.
11.
Pull the back seat belt to the chair
backrest.
12.
Fasten the buckle and tighten the belt.
13.
Pull the bottom seat belt to the chair
bottom.
14.
Fasten the buckle and tighten the belt.
HOW TO USE THE SAFETY HARNESS
15.
Place the child on the seat and adjust
strap length: belt, croth strap and har-
ness all can be adjusted the length to
use snug.
16.
Press the left side in the button of the
buckle to release the left waist belt.
17.
Same operating for right waist belt.
18.
"D" rings are included for an anddition-
al harness if desired.
HOW TO CLOSE THE CHAIR
BOOSTER SEAT
19.
Push the belt like the picture.
20.
Push the both side circle like the picture.
21.
To forward the plastic then the chair
booster seat while like this.
22.
Push the circle to the plastic like the
picture.
23.
Make the belt buckle fasten like the
picture.
24.
Fasten the belt from the seat under to
the upper side like the picutre.
25.
Fasten the back belt buckle like the
picture.
26.
Finish the belt fasten.
27.
Put the seat in to the carry bag like the
picture.

CARE AND MAINTENANCE

The cleaning and maintenance of this prod-
uct must be carried out on a regular basis
by the user.
CLEANING
The cover is removable. Clean the fabric
parts with a damp sponge and neutral de-
tergent. Please refer to the product's care
label. Routinely wipe clean plastic parts
with a soft damp cloth. Always dry the met-
al parts to prevent the forma- tion of rust
with water.
MAINTENANCE
Prolonged exposure to the sun and inade-
quate washing may alter the colours. Limit
12
exposure if possible If the metal parts get
wet or damp, dry them. To avoid the risk of
fire, do not leave the porduct close to strong
heat sources ( electric or gas stoves). Clean
the product with a damp cloth or sponge
with a mild detergent. Don't use abrasive
products. Do not bleach.
MATERIALS
Lining:
100% polyester
Plastic:
polypropylene
Tube:
steel
SIZES
Open:
L: 48.7 cm; H: 43.7 cm; P: 37 cm.
Close:
L: 32 cm; H: 11.3 cm; P: 37 cm.
WARNINGS
• WARNINGS!
Failure to follow these
warnings and the assembly instructions
could result in serious injury or death.
Please save owner's manual for future
use.
Adult assemble required.
Never leave the child unattended.
Always use the restraint system and en-
sure it is correctly fitted.
Always use the chair attachment sys-
tem and ensure it is correctly fitted be-
fore use.
Always check the security and the sta-
bility of the product on the adult chair
before use.
Do not use this product on stools or
benches.
This product is intended for children
able to sit up unaided (minimum 6
months) and up to 3 years or a maxi-
mum weight of 15 kg.
Ensure that the adult chair with the
chair booster seat is placed in a position
where the child is not able to use its feet
to push against the table or any other
structure as this can cause the tip over
of the adult chair supporting the chair
booster seat.
Do not use if any part is broken, torn or
missing.
Do not use accessories or replacement
parts other those approved by the man-
ufacturer.
When it is not used, the the chair boost-
er seat must be kept away from the
reach of chil- dren.
FOR TECHNICAL OR COMMERCIAL REA-
SONS, GIORDANI RESERVES THE RIGHT, AT
ANY TIME AND ALSO ONLY IN A SPECIFIC
COUNTRY, TO MODIFY THE TECHNICAL
CHARACTERISTICS OF THE MODELS DE-
SCRIBED IN THIS LEAFLET, AND/OR THE
SHAPE, TYPE AND NUMBER OF THE AC-
CESSORIES SUPPLIED.
13

Publicidad

loading