C Re Nd Cle Ning; Troubleshooting - Applica CLEAR2O CWS100 Manual De Instrucciones

b . Using your index finger, lift the filter lid to open
(U) .
U
c . Insert the filter into the filter reservoir by lining
up (up arrow) on the filter bar with
▲
symbol) on the lid (V) .
V
d . Turn the bar clockwise to the (locked symbol)
position . Be sure filter is locked in place (W) .
Tip: The bar must be fully aligned with the
(locked position) for the filter lid to close .
e . Close the filter lid .
W
CLE NING
Pitcher
1 . Remove lid assembly:
a . To remove the lid assembly, pull the quick-connect hose out of the storage
compartment .
b . Holding the pitcher by the handle with one hand,
grasp quick-connect hose with your other hand
– as close as possible to where it connects to the
pitcher (X) .
c . Gently pull up on the hose to release the lid
assembly .
X
11
All manuals and user guides at all-guides.com
(unlock
For additional instruction or assistance, please visit our website – www.clear2o.
com – and click on "Customer Care" at the top of the page.
The website includes a tutorial video that can be viewed by clicking
"Tutorial Video".
If you still require assistance, please call customer service at 1-800-231-9786.

TROUBLESHOOTING

Filter lid does not close Make sure the filter is securely locked
in place . Verify the bar on the filter is fully
aligned with the
Not able to attach Follow instructions for ttaching
connector to the faucet Connector to Faucet .
Water leaks or sprays Verify that you placed the washer
from connection at faucet between the faucet and the adapter .
Confirm that you have pushed the faucet
connector all the way onto the faucet .
Cannot remove the filter Turn filter bar past the unlock position
and keep turning until filter is released .
(locked symbol .
12