Install Filter - GE Profile PV977 Manual Del Propietario E Instrucciones De Instalación

INSTALLATION - VENTED TO THE OUTSIDE
STEP 11: INSTALL DUCT COVERS
(Cont.)
covers to the hood assembly from the underside
of the hood.
20
Installation Instructions
STEP 12: INSTALL METAL GREASE
FILTER
NOTE: The charcoal filter is not required for this
installation.
left side of the filter opening. Lift up the right side
of the filter and push gently until the filter locks
into place. Make sure the filter lock is in the closed
position to secure the filter.
lock to release.
NOTE: Only for recirculating version, air deflector
not included.

INSTALL FILTER

Charcoal Filter
Insert the charcoal filter into the opening. Push the
latch on both sides toward the center and engage
the flange.
(Cont.)
49-2000915 Rev. 0