Powering Off The Device - Intel Euclid Guia Del Usuario

Powering ON the Device
The Intel® Euclid™ Development Kit contains three meth-
ods of powering on the Main Unit.
1. Battery power. To use the device in it's mobile mode,
attach the battery as shown. Follow the quick start
instructions.
2. Battery charging. To charge the battery, the device
can be either ON or OFF (if the device is in the OFF
state, then the Charging LED will not illuminate).
Attach the battery to the Main Unit. Plug the AC
Power Adapter into an available outlet. Connect the
USB 3.0 cable into the AC Power Adapter with the
other end into the OTG port on the Main Unit. Fol-
low the quick start instructions.
3. No battery. To use the device without the battery
connected, plug the AC Power Adapter into an avail-
able outlet. Attach the Power Adapter Plate to the
back of the Main Unit (same procedure as attaching
the battery). Connect the USB Power Cable to the
AC Power Adapter and the Power Adapter Plate.
The device is ready to power on.
WARNING: DO NOT attempt to supply power to the USB 3.0 Type A
port. Only use the supplied Power Adapter and cable.

Powering OFF the device

To power off the device, there are three methods:
1. Web interface. From the web interface, click on
POWER, then choose SHUTDOWN.
2. Shutdown. Press and hold the ON/OFF button for
~8-10 seconds and release. The device will shut
down.
3. Forced Shutdown. Press and hold the ON/OFF but-
ton for ~15 seconds. The device will force shutdown.
Document: CCS-G003-UM-001 Revision: Feb 2017