Manuales relacionados para Mooreco Compass MakerSpace 9169 Serie
Resumen de contenidos para Mooreco Compass MakerSpace 9169 Serie
- Página 1 Compass MakerSpace Tables Part Numbers: 9169X-X-XXXX, 9169X-X-BUTCHER ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSEMBLAJE INSTRUCTIONS DE MONTAGE DO NOT THROW AWAY! NO LA TIRE NE PAS JETER UPDATED AS OF: 10/07/2019 1 of 4...
- Página 2 Parts Hardware A1 - #10 x 1” P1 - Table Top Wood Screw (x18 - 48”) (size will vary) A2 - 1/4-20 x 3” Bolt P2 - Leg Bracket (height will vary) A3 - 1/4-20 Lock Nut P3 - Support Bracket (length will vary) A4 - Lock Washer P4 - Locking Caster...
-
Página 3: Avertissements
WARNINGS AND DISCLAIMERS ADVERTENCIAS Y RENUNCIAS AVERTISSEMENTS Review full assembly instructions and Previo a comenzar el proceso de Avant de commencer l’ assamblage check that all parts are present before ensamblaje favor revisar veuillez consulter instructions beginning assembly. Heavy or large instrucciones y asegurarse que cuenta con complètes et vérifier si vous avez toutes furniture may require multiple persons in... - Página 4 Assembly Connect Leg Bracket (P2) to Support Bracket (P3) using bolts (A2) and nuts (A3). Repeat step for other leg. Lay frame on top of underside of table. Use holes on table as guide for placement. Mount frame to table using screws (A1). Each leg receives six screws.
-
Página 5: Side Panels
Compass MakerSpace Table - Side Panels Part Number: 52990-XXXX ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSEMBLAJE INSTRUCTIONS DE MONTAGE DO NOT THROW AWAY! NO LA TIRE NE PAS JETER UPDATED AS OF: 10/07/2019 1 of 4... - Página 6 Parts Hardware A1 - Self-Tapping P1 - Side Panel 16mm Phillips ASSEMBLY INSTRUCTIONS DO NOT THROW AWAY! INSTRUCCIONES DE ENSEMBLAJE NO LA TIRE INSTRUCTIONS DE MONTAGE NE PAS JETER UPDATED AS OF: 10/07/2019 2 of 4...
- Página 7 WARNINGS AND DISCLAIMERS ADVERTENCIAS Y RENUNCIAS AVERTISSEMENTS Review full assembly instructions and Previo a comenzar el proceso de Avant de commencer l’ assamblage check that all parts are present before ensamblaje favor revisar veuillez consulter instructions beginning assembly. Heavy or large instrucciones y asegurarse que cuenta con complètes et vérifier si vous avez toutes furniture may require multiple persons in...
- Página 8 Assembly Slide side panels (P1) between legs and line up holes on side edge of panels with holes in leg bracket. Secure side panel in place with 8 self-tapping screws (A1) fastened directly into leg. Repeat step for other panel. If only installing side panels, with two or more people flip table upright.
- Página 9 Compass MakerSpace Table - Shelves Part Numbers: 91698, 91699 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSEMBLAJE INSTRUCTIONS DE MONTAGE DO NOT THROW AWAY! NO LA TIRE NE PAS JETER UPDATED AS OF: 10/07/2019 1 of 4...
- Página 10 Parts Hardware P1 - 91698 A1 - M6 x15mm Long Shelf Hex Screw -OR- A2 - Lock Nut P2 - 91699 Short Shelf Tool(s) Provided: -Allen Wrench ASSEMBLY INSTRUCTIONS DO NOT THROW AWAY! INSTRUCCIONES DE ENSEMBLAJE NO LA TIRE INSTRUCTIONS DE MONTAGE NE PAS JETER UPDATED AS OF: 10/07/2019 2 of 4...
- Página 11 WARNINGS AND DISCLAIMERS ADVERTENCIAS Y RENUNCIAS AVERTISSEMENTS Review full assembly instructions and Previo a comenzar el proceso de Avant de commencer l’ assamblage check that all parts are present before ensamblaje favor revisar veuillez consulter instructions beginning assembly. Heavy or large instrucciones y asegurarse que cuenta con complètes et vérifier si vous avez toutes furniture may require multiple persons in...
- Página 12 Assembly With table upside down insert shelves (P1 or P2) at an angle such that shelf fits between panels. Attach each shelf to side panels with four screws (A1) and lock nuts (A2) at desired shelf height. Some of the options for shelf configurations are depicted below.