Publicidad
Idiomas disponibles
Idiomas disponibles
S E T U P I N S T R U C T I O N S
CONNECT TO A BROAD RANGE OF MUSIC AND GAMING DEVICES
Compatible with any device that accepts mini 1/8 in (3.5 mm) stereo or RCA-type connectors with mini
stereo adapter. Do not plug your iPod headset or other headsets into Line In on the back of the Mint
amplifier as it may damage your headset.
1. Select the correct cable for the device that you want to connect.
I
Line In cables are not provided. You will need to supply the correct cable for the type of device
that you are connecting. The cable may have been included with the device that you are connect-
ing. If not, get the correct cable from any electronics store or visit www.mondo-usa.com/service for
more information.
I
Portable devices such as a variety of MP3 players,
CD players, games and small TVs are likely to
accept a mini stereo connector.
I
Devices such as larger TVs, gaming consoles,
and portable stereo CD players commonly use
RCA-type connectors. You will need a cable
that has a mini stereo connector on one end and
RCA-type connectors on the other.
2. Plug the mini stereo connector into Line In on the
back of the Mint amplifier. If the cable has two mini
stereo connectors, plug the second into the Line Out
or headset jack on the music source. If the cable has
RCA-type connectors on the other end, plug in red to
red and white to white on the music source.
3. Press the line in source-selection button on the Mint
amplifier or remote control. It should glow green.
4. Turn your music source on and select your favorite
music, game or video source.
FOR ASSISTANCE AND MORE QUICK FIX INFORMATION,
CONTACT US AT WWW.MONDO-USA.COM/SERVICE.
10 ENGLISH
mini stereo cable
RCA-type cable
R
L
T
O U
T I P S A N D Q U I C K F I X E S
How do I get the best music quality from my
Mondo Mint Digital Music Station?
Always rip your music in the highest possible
format. To learn more or to get your CD collection
into your computer or iPod,
contact our preferred music
partner, Riptopia, at www.riptopia.com.
Where did the music go? Try these quick fixes:
1. Check the power connections.
2. Check the connection between the Mint
amplifier and the Mint speakers.
3. Make sure the correct source-selection button
is selected on the Mint amplifier or remote
control. The button should glow green.
4. Check the connections between the music
source and the Mint amplifier. For an iPod,
make sure it is properly seated in the dock.
5. Make sure that your music source is turned
on and that music is selected.
6. Turn up the volume. Make sure that mute
is not selected on any system component.
How do I replace the remote control battery?
Replace the battery when the remote stops
operating normally:
1. Place the tip of a pencil in the small slot at the
bottom of the remote. Pull the tray open.
2. Replace with a CR2025 3-volt lithium battery.
3. Push tray closed until it clicks in to place.
4. Dispose of used battery properly. Do not
dispose in fire or attempt to recharge. For more
information on proper battery disposal, refer to
the battery manufacturer.
Why did the Mint system turn off when playing
my music extremely loud?
The Mint system may turn off to protect you and
the product from harm. If this happens, turn the
power button on the Mint amplifier to the "off"
position. Wait for 5 seconds and press the power
button on the Mint amplifier to the "on" position.
When I disconnect the USB cable from my
PC and reconnect it, the sound is not playing
through my Mint amplifier. What should I do?
Close Windows Media Player and reopen it. If the
sound still isn't playing through the Mint amplifier,
shut down your PC and restart.
Why is my Mint wireless dock blinking red?
Your Mint wireless dock and your Mint amplifier
were paired at the factory and should work once
the Mint wireless dock is set up. A blinking red
light on the Mint wireless dock indicates that it
needs to be paired manually:
1. Push and hold the wireless audio button on the
top of the Mint amplifier until it begins blinking
(about 3 seconds). Release the button. The
Mint amplifier is now ready to receive a pairing
signal and will continue blinking for 30 seconds.
If it does not receive a pairing signal within that
time it will stop blinking and return to its normal
operational mode.
2. Turn the Mint wireless dock over and find the
button on the bottom. As soon as you push the
button, it instantly sends a pairing signal and
pairing is complete. The wireless audio button
on the Mint amplifier and the light on the Mint
wireless dock will glow green.
1
2
CONNECT
:03
Wireless
Audio
ENGLISH 11
Publicidad
