Selecting Inputs - NAIM superuniti Guia De Inicio Rapido

2.4 If a subwoofer or external power amplifier is to be used, the SuperUniti preamp and subwoofer outputs must be configured.
Enter Setup Mode and select Speakers followed by Amp Used. Select All Outputs if both the SuperUniti internal amplifier and
a subwoofer or an additional external amplifier are to be used. Select External if an external power amplifier is to be used in
place of the SuperUniti internal power amplifier. Select Internal Only if no subwoofer or external power amplifier is to be used.
2.5 SuperUniti is configured when shipped to connect to wired TCP/IP home networks automatically. However, if your SuperUniti
has been previously used and its network configuration altered, or your router requires nonstandard settings, it may not be
able to do so. Refer to the Reference Manual if this appears to be the case.
If a wireless network connection is to be used, your SuperUniti will require configuration to join the network. Enter Setup
Mode and select the Network Settings option to configure the SuperUniti wireless settings.
2.6 To adjust the SuperUniti volume use either the front panel volume knob or the handset volume keys.
3.
3.1 SuperUniti inputs can be selected by pressing the front panel input button, the handset navigation (56) keys or one of the
handset input selection keys.
3.2 Pressing one of the handset input selection keys either selects a single input or scrolls through a group of inputs. For example,
pressing the radio key scrolls through a group comprising the FM, DAB and iRadio inputs. To modify the key assignments enter
Setup Mode and select Handset Buttons.
3.3 When SuperUniti is connected to a network with high speed internet access it will automatically download a list of available
internet radio stations. When the iRadio input is subsequently selected, a menu will be displayed that lists all the available
stations. Use the handset navigation (563) and ok/list keys to browse the list and select stations.
®
3.4 SuperUniti can play Spotify streams via the Spotify
®
in receipt of a Spotify stream, the SuperUniti will automatically select its Spotify
established, it can be controlled using the Spotify
3.5 SuperUniti can play audio streams over a Bluetooth wireless connection from appropriately equipped playback devices.
SuperUniti is configured by default to require "pairing" with a Bluetooth streaming device before it can play a Bluetooth audio
stream. To pair a SuperUniti with a Bluetooth device select the Bluetooth input and press the handset play/pause key (
SuperUniti will become available for pairing in the Bluetooth device setup menu. Once successfully paired with the Bluetooth
device, the SuperUniti will be available to the audio apps on the device. SuperUniti will switch automatically to its Bluetooth
input when in receipt of a Bluetooth stream. The SuperUniti Bluetooth input setup menu offers further Bluetooth configuration
options including "open" pairing.

Selecting Inputs

®
Connect facility incorporated in some Spotify
®
input. Once Spotify
®
app, the Naim app or the SuperUniti handset or front panel controls.
Speakers
4Amp Used: Internal Only
Max. Volume:
Balance:
Network Settings
4Name:
Wireless:
Status: Not Connected
DHCP:
Note 3: The Naim app, available from the iTunes App Store and Google
Play Store, enables wireless touch screen control from iOS and Android
devices.
Internet Radio
Added stations
Naim's Choice
4Location
Genre
®
player apps. When
®
playback is
Bluetooth
4Enabled:
Name:
). The
Input Trim:
Discovery: Super BT XX..
USB/iPod
Sing Loud.wav
Grace and Danger.wav
Song 44.wav
4I Was A Cloud.wav
SuperUniti • English
1/3
100
0
1/5
Super-XXXX
Not Used
Yes
3/8
Note 3.4: The default SuperUniti network
name (Super-XXXX) incorporates the last
four characters of the unit's MAC address.
The full MAC address is listed in the
1/5
Network Settings menu.
Yes
Bluetooth
Note 3.5: The default SuperUniti Bluetooth
0
name (Super BT XXXX) incorporates the last
four characters of the unit's MAC address.
4/18