Naming Preset Stations; Sorting Preset Stations - Sony ST-SA5ES Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Naming Preset Stations

You can assign a name up to 8 characters long (5
characters for the ST-SA3ES) to each preset station
except FM RDS stations. When the station is tuned in,
the station name will appear along with the frequency.
(The ST-SA3ES displays the station name instead of the
frequency.)
CHARACTER
MEMORY
1
Press CHARACTER.
The cursor blinks in the display.
2
Turn TUNING/SELECT to select a character.
See the list below for the characters available.
3
When the character you want appears, press
CHARACTER to move the cursor into position for
the next character.
If you make a mistake
Press CHARACTER repeatedly until the character you
want to change flashes (every time you press
CHARACTER, the next character flashes). Then turn
TUNING/SELECT to select a new character.
4
Repeat steps 2 and 3 until the station name you
desire appears in the display.
5
Press MEMORY.
6
Press SHIFT and one of the preset buttons to
specify the preset where you want to store the
station name.
Character list
(space)
Note
The display returns to normal display mode if you stop
assigning names for more than 8 seconds. If this happens,
start again from the beginning.
z To see the frequency of the displayed station name
(ST-SA3ES only)
Press DISPLAY repeatedly.

Sorting Preset Stations

TUNING/
SELECT
This tuner's sorting feature lets you arrange your
station presets automatically, according to alphabetical
order, signal strength, country code, or tuner band.
1
Press MENU.
2
Turn TUNING/SELECT until "Sort" appears in
the display and press ENTER.
If no stations have been stored as presets, "No
Preset" appears in the display.
3
Turn TUNING/SELECT to choose one of the
following sorting methods:
Choose
Alphabet
Strength
Country
Band
4
Press ENTER.
The tuner sorts the stations, then returns to
normal tuning mode and receives preset station
A1.
Note
Some countries use the same country code, and the stations
from these counties may be arranged together.
Advanced Tuner Operations
MENU
ENTER
To sort
preset stations in alphabetical order
according to their preset names.
Stations without preset names are arranged
by frequency, from low to high.
preset stations in order of their signal
strength (FM stations only).
MW and LW frequencies are arranged by
frequency.
FM RDS stations with PI information
alphabetically by country.
Other stations are arranged by frequency.
stations in order of their frequency band
(FM - MW - LW).
TUNING/
SELECT
11
GB

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

St-sa3es

Tabla de contenido