Página 1
Accent Chair DA2011329N (Light Gray) DA2011229N (Mustard) Weight Limit:250Lb/113Kg Thank you for purchasing from Dorel ! DO NOT RETURN TO THE STORE ! I f parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase...
Página 2
Saturday 10 am to 6:30 pm (Eastern Time) Sunday 11 am to 7 pm (Eastern Time) Do NOT use Hammer required to powertools complete the assembly (not included) DHP Consumer Services 12345 Albert Hudon, Suite 100, Montreal, Quebec H1G 3L1...
Página 4
PART S LIST Seat Cushion Left Side Frame Right Side Frame Round Bar Backrest upper frame X 1 PCS X 1 PCS X 1 PCS X 1 PCS X 2PCS IMPORTANT: Each part has a unique part number. Please reference the appropriate part number when contacting customer service for replacement parts.
HARDWA RE LIST BOLT BOLT ALLEN KEY 1/4"*1-5/8" 1/4"*3/4" 1 PC 2 PCS 7 PCS Please do not completely tighten all the hardware, until the entire assembly is complete, unless Hardware Pack otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are Hardware Pack #: TDA2011329N-00 shown in actual size in the lower right corner of the page.
Página 6
Step 1 Put Right Side Frame (A) on the ground, insert one extremity of each Round Bar (C) into the Right Side Frame (A). Then insert the other extremity of the round bar (C) into the Left Side Frame (B) as shown. Please make sure that the bracket of the Round Bar (C) is in the same direction as the other brackets located on the Side...
Página 7
Step 2 Insert the Backrest Upper Frame (D) on Side Please make sure the bracket of Frames(A&B)as shown. the Backrest Upper Frame (D) If needed, you can use a hammer to facilitate faces forward. this step. Use the hammer gently, in order to prevent damage of the components.
Página 8
Step 3 Attach the Seat Cushion (E) to the pre-assembled metal frame with bolts as shown.
Página 9
Step 4 Attach the Back Cushion (F) to the pre-assembled metal frame with bolts as shown.
Página 10
Step 5 Attach the Back Cushion (F) to the pre-assembled metal frame with bolts as shown.
Keep away from heat to avoid glazing, melting or burning of components. lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Clean the product with a soft damp cloth. DO NOT use harsh chemicals or abrasive cleaners.
Domingo / 11 am - 7 pm (hora del este) ADVERTENCIA PARA NIÑOS PEQUEÑOS - Este producto contiene • DHP Servicios al Cliente componentes pequeños. Por favor asegúrese de que las piezas estén fuera 12345 Albert Hudon, Suite 100, Montreal, Quebec, Canada, H1G 3L1 del alcance de los niños.
● Mueva sus muebles nuevos con cuidado, se requiere de dos personas para levantar y trasladar su mueble a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. ● Limpie el producto con un paño suave. NO utilice productos químicos o Paquete de componentes abrasivos de limpieza.
Dimanche / 11 am - 7 pm (Heure de l'Est) Ce produit est conçu pour un usage domestique et n'est pas destiné à des • DHP Service à la Clientèle fins commerciales. 12345 Albert Hudon, Suite 100, Montréal, Québec, Canada, H1G 3L1 AVERTISSEMENT CONCERNANT LES JEUNES ENFANTS: Ce produit contient des petits composants.
● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les déménagements. ● Nettoyez le produit avec un chiffon doux. NE PAS utiliser de produits chimiques Quincaillerie ou abrasifs.