Publicidad
STEP 2
NOTE: ASSEMBLY SHOWN FOR 60 - 66 in. DISTANCE.
2-1. Slide all four tube collars (I) down a long tapered tube (D) and use set screws to loosely
tighten into place, you will be adjusting later.
2-2. Place an end cap (E) onto the long tapered tube (D), as shown. This is the tube assembly.
Now continue to step 3, page 9.
2-3.
Pg 4 of 28
D
I
tapered end at the top
zoomed in view
I
D
top
I
E
set screw
60 in.
66 in.
(800) 892-3986
IS02147-I3
to
Publicidad
