Cleaning The Filter; Precautions For Safe Use; Exhaust Filter; Motor Protection Filter - Microsonic ASPRCL381 Manual De Instrucciones

CLEANING THE FILTER

EXHAUST FILTER

• Switch off. • Press the clamp position of the
air outlet cover to discharge the
air outlet cover forclean up or a
new replacement.
MOTOR PROTECTION
FILTER
• Switch off and open the • Take the dust bag holder
cover. with dust bag out from the
dust compartment

CHANGING THE DUSTBAG

• Switch off and open the • Take the dust bag holder
cover. with dust bag out from the
dust compartment.
• Separate the filter from the
filter case and shake the dust
out of the filter.
• Shake the dust out of the
filter.
• Insert the new dust bag into
the dust bag holder properly
as shown in picture.
Note: If no dustbag has been
placed into the dustbag holder,
the cover cannot be closed.
3

PRECAUTIONS FOR SAFE USE

This vacuum cleaner should only be used for normal dry household dust and dirt.
The manufacturer cannot be responsible for any damage caused by use or operation of the cleaner
contrary to these instructions.
If the cleaner is wrongly operated for a purpose other than that for which it is intended. no liability can be
accepted for any possible damage.
• Do not vacuum areas which contain moisture
or water and inflammable matter, needles,
pins, razor blades, matches, cigarette-ends,
etc., since they may damage the cleaner or
dust bag or cause a fire.
• Make sure a dust bag and a motor protection
filter are always inserted.
• When rewinding the power cord, hold the plug
body before pressing the cord rewind button
to prevent whipping.
• Do not pull the power cord beyond the
specified length.
• This product provided with a cable which, if
damaged must be replaced by a repair shop
authorized by the manufacturer since special
tools are required.
4