Everbilt BPSH4WHD Guía De Uso Y Cuidado

Tools RequiRed
Caulking gun
Installation
1
ATTAcHinG THe VenT cAP To
THe PiPe
□ Attach the vent cap to the pipe.
Ensure the pipe fits snugly inside
the collar. Align the clips on the
collar (A) so they snap into the pipe
slots (B).
A
4
secuRinG THe VenT cAP
□ Secure the vent cap to the wall
by screwing it into place and/or
caulking around the reveal.
Safety Information
IMPORTANT: Vent the exhaust hood outdoors through a wall or window opening as close as possible to the dryer.
Warranty
WHAT is coVeRed
All merchandise is warranted to be free from defects in workmanship and material for one year from the date of purchase. This includes normal wear and
performance failure on items. The manufacturer will replace or repair at their option.
WHAT is noT coVeRed
This warranty only covers normal wear and performance failure. It does not cover any malfunction, performance failure, or defect arising from the misuse,
abuse, neglect, or modification of the product. Any damage or malfunction inflicted upon the product by the user or other external sources, or any failure to
comply with the warnings and instructions, is not covered.
For further assistance visit www.HomeDepot.com.
Use and Care Guide
Spring Loaded Exhaust Hood
Phillips screwdriver
2
cuTTinG A Hole THRouGH
THe WAll
□ Cut a hole through the wall ¼ in.
diameter larger than the pipe. For
example, to accommodate a 4 in.
pipe cut a hole 4 ¼ in. in diameter.
NOTICE: Ensure the appropriate tool is used
to cut the hole in the wall according to the type
of wall material.
10.2 cm
B
5
ReMoVinG THe sHield
□ Grasp the finger pulls and twist the
shield counterclockwise to align
the arrow with the unlock symbol.
HARdWARe RequiRed (noT included)
Screws (4)
4 ¼ in
4 in
10.8 cm
Item # 593-410
Model # BPSH4WHD
Latex caulking
3
insTAllinG THe
exHAusT Hood
□ From the outside, pass the pipe
through the hole opening until
the vent cap lies flush against the
outside wall surface.
6
cleAninG THe VenT
□ Remove the shield to clean out
the lint and debris from inside the
vent. Replace the shield and turn it
clockwise to align the arrow with
the lock symbol.
HomEDEPoT.Com