Assembly - Home Decorators Collection GPBGVT3118DR Guía De Uso Y Cuidado

Assembly

1
Preparing the wall
□ Measure a vertical distance of 30-3/4" from the oor using
a tape measure, and mark on the wall with a pencil.
This will be the height of the wall bracket (AA).
35"
3
Hanging the vanity
□
Lift the vanity (A) above the bracket (AA) and place it
against the wall.
□
Slide the vanity (A) to the left or right to the desired location.
□
Slide the vanity (A) down the wall, hooking it onto the
bracket (AA).
30-3/4"
4
A
AA
4
2
Installing the bracket
□
Place the wall bracket (AA) against the wall at this location.
Ensure it's horizontally straight by using a level.
□
Insert the screws (BB) through the bracket (AA) holes and
screw them into the wall with the screwdriver.
Adjusting the levels
□
Adjust the top bolt (1) to tilt the vanity (A) from front to back.
Adjust the bottom bolt (2) for leveling the vanity (A) left or right.
□
After all adjustments are completed, replace the plastic cap.
AA
BB
A
1
2