Installation Steps; Important Notice - Air Live OV-110TMC Guía De Configuración Rápida

Installation Steps

1. Remove the switch and accessories from the package.
2. Connect the power adapter to the media converter and the power outlet. Make sure that "PWR" LED is "ON"
status.

Important Notice

1. Please don't change the DIP-switch setting when UTP or fiber port is transmitting or receiving data. It may
cause some data error
2. The cable between the converter and the link partner (switch, workstation, etc.) must be less than 100
meters (328 ft.) long.
3. Fiber segment using multi-mode connector type must use 50 or 62.5/125 um multi-mode fiber cable. You
can connect two devices up to a 2-kilometer (6,562 ft.) distance.
4. Fiber segment using single mode connector type must use 9/125 μm single-mode fiber cable. You can
connect two devices in the distance of 60 Kilometers in full duplex operation. For half-duplex operation, the
recommended maximum distance is 412 meters (1,352 ft.)
5. Always check the LED lights for troubleshooting.
English
6
OV-110TMC/OV-110TMT/OV-110TSC