Getting Started; Using The Microphone - Bigben KARAOKE ROBOT Instrucciones De Uso

2. Getting started

a. Batteries (should only be handled by adults):
Use a screwdriver to remove the cover of the battery compartment (8). Insert 4 AA batteries and
close the cover.
b. Press the Power button (7) to turn the power on.
3. USB playback – Connecting a USB flash drive / AUX-IN cable (included)
Make sure to store your music on a USB flash drive or in the unit's internal memory before playing.
a. Insert the USB flash drive into the USB port (19), or
b. Connect the AUX-IN cable to the AUX-IN jack (22).
c. Select USB or AUX (13) input.
d. The total number of tracks will appear on the LED display.
e. The music will play automatically starting from the first track. The LED display shows the current
song number.
f. Press Next (10) to play the next track or Back (11) to play the previous track (only with USB input).
g. Adjust the music volume to increase or decrease the volume of the speakers.
h. Play/Pause (12): press Pause to pause and press Play again to resume playback.
i. Press Stop (9) to stop the music (only with USB input).
** With AUX input there are no Stop, Next and Back functions.

4. Using the microphone

a. Take one of the microphones (18) and switch it ON (17).
b. Turn the Microphone function (14) ON. The Green LED star (2) indicates the microphone function
is on.
c. Hold the microphone 1-2 cm in front of your mouth. Adjust the microphone volume (5) and sing
along with the music.
d. When finished, turn the microphone OFF (17) and turn the microphone function OFF (14).
5. Internal memory playback
You must save your music files in MP3 format to the internal memory before playing or playback will
not work.
Select Internal Memory input. The music you have saved will play automatically starting from the first
track.
Remark: Please note that only the USB keys with format FAT32 and under a capacity of 32Gb can be
read by the unit.
- EN 3 -