Würth BS 14-A Power Traducción Del Manual De Instrucciones De Servicio Original página 14

OBJ_BUCH-1566-001.book Page 14 Monday, November 21, 2011 8:31 AM
Delivery Scope
Cordless screwdriver/Combination cordless drill.
Battery, application tools and other accessories
shown or described are not part of the standard deliv-
ery scope.
Intended Use
The machine is intended for driving in and loosening
screws as well as for drilling in wood, metal, ceramics
and plastic. "Combi" machines are additionally
intended for impact drilling in bricks, brickwork and
masonry.
For damage caused by usage other than intended,
the user is responsible.
Tool Specifications
The tool specifications of the machine are listed in the
table on page 160.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Tool Specifications" is in
conformity with the following standards or standardi-
zation documents: EN 60745 according to the provi-
sions of the directives 2004/108/EC, 2006/42/EC.
Technical file at:
Adolf Würth GmbH & Co. KG, Abt. PFW
74650 Künzelsau
T. Klenk A. Kräutle
General Manager General Manager
Künzelsau: 05.10.2011
Noise/Vibration Information
The measured values of the machine are listed in the
table on page 160.
Noise and vibrational values (vector sum of three
directions) determined according to EN 60745.
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep hands warm,
organise work patterns.
Mounting and Operation
Action
Removing the Battery
Inserting the Battery
Checking the battery charge
condition
Changing the position of the
auxiliary handle
Mounting application tools
Reversing the Rotational
Direction
Setting the Torque
Selecting the drilling position
Setting the Operating Mode
Gear Selection, Mechanical
Switching On and Off
Figure Page
1 161
2 161
3 161
4 162
5 162
6 163
7 163
8 164
9 164
10 164
11 165
14