Publicidad
Idiomas disponibles
Idiomas disponibles
Strictly comply with instructions for installation and use.
Receiver description
1
A. Speaker
B. Melody selection
C. Volume control
D. Additional transmitter pairing
E. Light indicator setting
F. Micro USB socket
G. Indicator light (LED)
Transmitter description
2
A. Name Plate
B. Weatherproof button
C. Light indicator
Transmitter/receiver pairing
3
Additional transmitters pairing: 4 maximum for 1 receiver (See procedure drawing 3)
Receiver installation: wall mounted/free-standing/plugged
4
Transmitter installation with screws/adhesive/free-standing
5
Changing Receiver/Transmitter Batteries
6
Do not use rechargeable batteries
Technical characteristics
7
Radio operating range: 200 m - 180 m receiver 230 V~ free fields conditions
Receiver sound power: 85 dB - 80 dB receiver 230 V~
Plug-in receiver power supply: 230 V~ - Frequency: 50/60 Hz
Receiver power supply: 3 x 1.5 V AA batteries (not included) / plug
Transmitter power supply: 1 x 3 V battery (CR2032) included
Frequency band: 433.05-434.79 MHz
RF power level: < 10 mW
Degree of protection of doorbell: IP 54 - of the receiver: IP 20
Flashing light
8
Flashing
Slow
Fast
Alternating
MP3
9
1 - Install the software on a computer, from the internal
memory of the doorbell, using the USB cable provided
9
2 - Click on the icon to launch the software
3 -
4 - Click + to import an MP3 melody in the selection window
5 - Select the melody and press play (mandatory 1 time)
6 - Set the duration of your melody by selecting the beginning and the end and then click ✂
Mode
7 - The software asks you to confirm where to save the new MP3 file: receiver memory
8 - To set the MP3 melody, select it with the B button
Someone rings
Low receiver battery
The undersigned, LEGRAND, declares that radio equipment of the type (0 942 72)
complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity can be found at:
www.legrandoc.com
5
MP3 (continued)
Publicidad
