Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS AND SPECIFICATIONS
A
B
C
D
E
A) Solar Panel
B) Lens
C) LED Button
D) LED Charge/
Bluetooth indicator
®
CHARGING INSTRUCTIONS
CHARGING METHOD:
1) USB charging port (F)
Connect the external 5V power supply to
charge the product. It takes 2.5 hours to
fully charge.
2) Solar photovoltaic panel can provide 5V
110mA charging current when placed
in direct sunlight for charging. It takes 20
hours to fully charge.
OPERATING INSTRUCTIONS
HOW TO OPERATE POWER BUTTON (E):
1) Press Power button (E) and hold for 2 seconds to turn speaker ON and enter the
Bluetooth pairing mode. The blue indicator light flashes, and the smart phone/tablet
®
searches for "Westinghouse SR83" to connect. When paired, the blue indicator light will
remain on.
2) When you double-click the power button (E), the current connected smart phone/tablet
will be disconnected and re-enter into the pairing mode. (Blinking (D))
3) Short press the power button (E) to pause the music playing.
NOTE: If you turn on the smart phone/tablet, and is not connectotd or has no signal, the
speaker will automatically shut down after 15 minutes.
NOTE: LOW BATTERY TIPS.
When the light experiences a low battery charge, it will vioice a warning "low battery,
please charge". Immediately charge with USB plug provided, or place light outside in direct
sunlight. If product is not charged in enough time, product will shut off.
HOW TO OPERATE LED BUTTON (C):
Press the LED button to turn on/off the candle light.
NOTE: Bluetooth speaker and LED light work independently of each other.
®
RUN TIME
Speaker
Candle Light
Speaker & Candle Light 6.5 HOURS
EN | 1
H
F
G
E) Power Button
F) Charging Port
G) Bluetooth Speaker
®
H) Micro USB Cable
A
F
6.5 HOURS
48 HOURS
8.5"
OPERATING INSTRUCTIONS
C
D
E
NOTE:
For volume control, use your smart phone/tablet.
MULTI-COLOR LED INDICATOR (E) INSTRUCTIONS:
1) RED LIGHT indicates solar LED light is charging. USB plug or solar charging,
red light will remain on until solar LED light is fully charged and turn off.
2) BLUE LIGHT indicates Bluetooth status. Turn on the Bluetooth speaker and enter
into the Bluetooth paring mode, the blue light flashes. After the smart phone/tablet is
®
connected with the speaker, the blue light will stop flashing and remain on.
WARNING:
1. This product is not a toy and contains small parts. Close supervision is necessary when
this unit is used near children.
2. To reduce the risk of electrical shock, do not put the unit in water or other liquid. For
cleaning, use a soft dry cloth. Do not place or store appliance where it can fall or be pulled
into a tub or sink.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B Digital
Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmfull interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-
Reorient or relocate the receiving antenna.
-
Increase the distance between the equipment and receiver.
-
Connect the equipment to an outlet on a circuit different from that which the receiver
is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may
cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
RF EXPOSURE:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment.
TRADEMARK ATTRIBUTION FOOTNOTE
Whenever the Bluetooth Trademarks are used in a particular piece, they must be attributed
with an appropriate trademark footnote. The recommended attribution footnote is as follows:
"The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
®
And any use of such marks by INTERNATIONAL DEVELOPMENT COMPANY is under license.
Other trademarks and trade names are those of their respective owners."
NOTE:
The Bluetooth brand elements may not be used in a fashion or manner that could
®
impair or otherwise damage the goodwill associated with the Bluetooth brand or the Fellow
Adopters (International Development Company). The Bluetooth brand elements shall
therefore not be used in connection with products and services that do not enable any
Bluetooth wireless functionality or in connection with unlawful, obscene, pornographic,
®
excessively violent, hazardous,or otherwise poor-taste activities.
F
®
®
®
®
EN | 2
Publicidad
