HP LaserJet 2200 Guía De Instalación Rápida página 27

Electrical Specifications
Power Requirements
Minimum recommended circuit capacity
for typical product
Average Power Consumption (Watts) -
(HP LaserJet 2200 series printer)
PowerSave default activation time is 15 minutes.
Values are subject to change. See http://www.hp.com/support/lj2200 for current information.
WARNING! Power requirements are based on the region where the printer is sold. Do not convert
operating voltages. This may damage the printer and void the product warranty.
Environmental Specifications
Temperature
(printer and toner cartridge)
Relative humidity
Acoustic Emissions
(HP LaserJet 2200)
You may wish to place printers with sound power equal to or greater than 6.3 bels in a separate room or cubicle.
Values are subject to change. See http://www.hp.com/support/lj2200 for current information.
ENWW
110-Volt Models
100-127V (+/- 10%)
50/60 Hz (+/- 3 Hz)
5.0 Amps
Printing (18 PPM) = 400 W
Standby = 12 W
PowerSave = 12 W
Off = 0 W
Operating Printing
15° to 32.5° C
(59° to 89° F)
10% to 80%
Bystander Position
Printing (18 PPM)
PowerSave
Sound Power
Printing (18 PPM)
PowerSave
220-Volt Models
220-240V (+/- 10%)
50/60 Hz (+/- 3 Hz)
2.5 Amps
Printing (18 PPM) = 400 W
Standby = 12 W
PowerSave = 12 W
Off = 0 W
Storage/Standby
-20° to 40° C
(-4° to 104° F)
10% to 90%
Declared Per ISO 9296
L = 51 dB(A)
pAm
Essentially inaudible
Declared Per ISO 9296
L = 6.6 bels(A)
WAd
Essentially inaudible
Specifications 23